老带新
首页  >  资源与文章  >  技术文章  >  分子筛耐受压力及可耐受溶液范围

分子筛耐受压力及可耐受溶液范围

时间:2025-05-29 10:49:19
浏览次数:68
分享:

一、报警压设置


分子筛在连接仪器之前需要设置报警压。如果超压会对柱子造成不可逆损伤。


●   有柱位阀的仪器:根据说明书或者以下表格设置柱前压和delta压;
●   没有柱位阀的仪器:系统压设置为delta column pressure+空载压力和pre column pressure两者中较小的那个数值。

 

注意:如果仪器在低温运行或者样品比较粘稠,适当降低报警压数值。

 

柱子名称 Pre column pressure delta column pressure
Superdex 30/75/200 increase 10/300 5 MPa
3 MPa
Superose 6 Increase 10/300
Hiload 16/600 Superdex 30/75/200 pg 0.5 MPa
0.3 MPa
Hiload 26/600 Superdex 30/75/200 pg
Superdex 30/75/200 increase 3.2/300 5 MPa
2 MPa
Superose 6 Increase 3.2/300
Superdex 30/75/200 increase 5/150 10 MPa
3 MPa
Superose 6 Increase 5/150

 

设置报警压软件操作:

Manual——Manual Instructions——Alarms——Alarm pre column pressure、Alarm delta column pressure

 

二、可耐受溶液范围

Superdex Increase,Superose Increase,Hiload Superdex系列

 

Long term use
Long term use 指填料在这些溶液中可以保持长时间稳定,并对填料没有不良的副作用。

• All commonly used aqueous buffers, pH 3 to 12
• Trifluoroacetic acid, up to 0.2%
• Isopropanol, up to 5%
• Dithiothreitol (DTT), up to 5 mM
• Acetonitrile, up to 10%
• Formic acid, up to 1%
• Urea, up to 8 M
• Guanidine hydrochloride, up to 6 M
• Ionic and non-ionic detergents, e.g., 1% SDS 
• Methanol, up to 10%

 

Short term use
Short term use 指可用于层析柱清洗,再生和消毒。

    • Sodium hydroxide, up to 1 M
    • Ethanol, up to 70%
    • Isopropanol, up to 30%
    • Hydrochloric acid, up to 0.1 M
    • Trifluoroacetic acid, up to 1%
    • Dimethyl sulfoxide (DMSO), up to 10%
    • Acetonitrile, up to 30% 
    • Methanol, up to 70% 
    • Formic acid, up to 70% 
    • Acetic acid, up to 1M

    Avoid:
    Oxidizing agents

    Non-filtered samples and eluents

     

    更多纯化相关资料和讲座,请进入优宁维蛋白纯化子网站查看:https://www.univ-bio.com/protein-home.html

    快速筛选出想要的纯化产品,点击进入纯化柱/填料筛选器:https://www.univ-bio.com/tooles/proteinTool2.html