mOPG Qkit (1 Kit)

Assay Procedure

1.   Prepare all reagents, standard dilutions, and samples as directed in the product insert.
2.   Remove excess microplate strips from the plate frame, return them to the foil pouch containing the desiccant pack, and reseal.

---

50 µL Assay Diluent

3.   Add 50 µL of Assay Diluent to each well.

---

50 µL Standard, Control, or Sample

4.   Add 50 µL of Standard, Control, or sample to each well. Cover with a plate sealer, and incubate at room temperature for 2 hours.
5.   Aspirate each well and wash, repeating the process 4 times for a total of 5 washes.

---

100 µL Conjugate

6.   Add 100 µL of Conjugate to each well. Cover with a new plate sealer, and incubate at room temperature for 2 hours.
7.   Aspirate and wash 5 times.

---

100 µL Substrate Solution

8.   Add 100 µL Substrate Solution to each well. Incubate at room temperature for 30 minutes. PROTECT FROM LIGHT.

---

100 µL Stop Solution

9.   Add 100 µL of Stop Solution to each well. Read at 450 nm within 30 minutes. Set wavelength correction to 540 nm or 570 nm.